News RSS

1) Size: DN40-DN600(1.5"-24")2) Nominal Pressure: 1.6MPa3) Sealing Test Pressure: 1.76MPa4) Shell Test Pressure: 2.4MPa5) Applicable Temperature: 0~80℃6) Fluid Medium: Water7) Material: DI Body Epoxy Resin Coated Red or Blue, Stainless Steel Filter Net.8) Flange Holes Match To: PN16 / BS4504 / EN1092 / DIN2502

1) Size: DN40-DN600(1.5"-24")2) Nominal Pressure: 1.6MPa3) Sealing Test Pressure: 1.76MPa4) Shell Test Pressure: 2.4MPa5) Applicable Temperature: 0~80℃6) Fluid Medium: Water7) Material: DI Body Epoxy Resin Coated Red or Bule, DI Disc Cover With NBR8) Flange Holes Match To: PN10 / PN16 / BS4504 / EN1092 / DIN2502

1) Size: DN40 to DN600 (1-1/2" to 24")2) Working Pressure: 1.6MPa3) Sealing Test Pressure: 1.76MPa4) Strength Test Pressure: 2.4MPa5) Material: brass rotating nut, ductile cast iron body, 2cr13 stem, NBR + DI seat, ductile cast iron handwheel6) Finishing: epoxy resin coated red or blue7) Applicable Medium: water / foam liquid8) Working Temperature: 0℃～80℃9) Flange Holes Match to: ANSI150lb / PN16 / BS4504 / EN1092 / DIN2502

1) Size: DN50 / DN65 / DN80 / DN100 / DN125 / DN150 / DN200 / DN2502) Rated working pressure: 1.2MPa / 12bar / 175psi3) Material: ductile cast iron body, chromed steel U stem, plastic head4) Type: vane type / saddle type5) Delay time: 2~90s6) Switch volume: DC24V/1A , AC220/3A7) Sensibility（L/min）: 15＜Q＜37.58) Contact output: normally close and normally open both one pair  

1) Size: DN80 / DN100 / DN125 / DN150 / DN200 / DN2502) Working pressure: 1.6MPa / 16bar / 235psi3) Material: DI body, brass seat, galvanized pipe, brass accessory valves4) With all fittings include hydraulic alarm bell, pressure switch, retard chamber etc.5) Flange holes match: PN16 / BS4504 / EN1092 / DIN2502 / ANSI150lb